Skip to content
NextgenBlueprintDesign · Build · Lubbock

SiteHale County · 46 mi north of Lubbock

Remodeling, Repair & New Homes in Plainview, TX

Nextgen Blueprint serves Plainview from Lubbock, about 46 road miles north on I-27, for remodels, roofs, foundation repair, and new homes. Plainview's housing is older than many people expect, with about half of its homes built before 1970 by Census estimates, and that shapes nearly every project here.

County
Hale
From Lubbock
46 mi north
Route
I-27
Coordinates
34.185°N 101.707°W
Service area map: Lubbock and communities within about 50 miles, including Wolfforth, Shallowater, Idalou, Slaton, Levelland, Plainview, and Brownfield10 MI25 MI50 MILOOP 289SH-114I-27US-62/82WolfforthShallowaterIdalouSlatonLevellandPlainviewBrownfieldLubbockN
Fig. 1 Plainview within our service area.

Plainview's 1960s and 1970s Housing Stock

Plainview dates to an 1887 post office, became the Hale County seat in 1888, and grew into the regional center it is today, home to Wayland Baptist University and a downtown commercial district listed on the National Register of Historic Places. The 2020 Census counted 20,187 residents.

Census estimates for 2020 to 2024 put Plainview's median home at about 1970. The 1960s were the biggest building decade, about 28 percent of today's houses, and the 1970s added another 21 percent, while only about 9 percent have gone up since 2000. That leaves thousands of homes that are 50 to 65 years old, many still running on original electrical panels, galvanized or early copper plumbing, and aging ductwork, with kitchens and baths that have not been touched in decades. For a lot of these houses the right project is not a single room but a planned whole-home remodel that updates the systems while the walls are open.

Runningwater Draw, Playas, and Plainview Foundations

Plainview sits on Runningwater Draw in flat Hale County farmland, where the Handbook of Texas describes sandy and loamy soils and many playas, the shallow basins that collect rainwater across the South Plains. On flat ground like this, drainage decides a lot. Water that sits against a foundation after a storm, because gutters are gone or the yard has settled toward the house, is the usual trigger for movement under a 1960s slab, and where the subsoil carries clay, the swelling makes it worse.

The signs are the same as anywhere on the South Plains: stair-step cracks in brick, diagonal drywall cracks at door corners, and doors that stick or will not latch. We start with a free foundation inspection, correct the drainage that caused the problem, pier what needs piering, and then repair the drywall and trim. If your lot is near the draw, check the flood map for your address before planning an addition.

Plainview Water and City Permits

The City of Plainview runs 16 public water supply wells and a treatment plant for water from the Canadian River Municipal Water Authority, whose supply comes from Lake Meredith and Ogallala Aquifer wells in Roberts County. Hardness varies with the blend, so test your tap before sizing a softener, and consider reverse osmosis at the kitchen sink for drinking water.

Permits run through the city's Building Permits and Inspections office at 202 W. 5th Street. The city lists new and remodeled homes, roof replacement, room additions, decks more than 32 inches high, retaining walls over 48 inches, HVAC work, new electrical circuits, plumbing changes, and wall removals among the work that needs a permit. It publishes separate residential applications for building, electrical, mechanical, plumbing, and roofing permits, plus checklists for new construction, remodels and additions, and re-roofing.

Working in Plainview From Lubbock

We serve Plainview from Lubbock, about 50 minutes straight up I-27. At that distance, the plan should group site visits, material deliveries, and city inspections so a job never sits idle waiting on a single trip, and it is fair to ask any contractor how they will handle that. The work that fits Plainview's housing:

  • Whole-home remodels of 1960s and 1970s houses, with the panel, wiring, plumbing, and ductwork updated in one project.
  • Foundation repair paired with drainage correction, then drywall, door, and trim restoration.
  • Roof replacement after hail, permitted through the city, with Class 4 shingles priced for the insurance discount.
  • Kitchen and bath remodels, with a softener sized to your tested hardness.
  • Electrical panel upgrades for houses still on original service.

Plainview questions

Do I need a permit to replace my roof in Plainview?

Yes. The City of Plainview lists roof replacement among the projects that require a permit, along with new and remodeled homes, room additions, decks more than 32 inches high, retaining walls over 48 inches, HVAC work, new electrical circuits, plumbing changes, and wall removals. The city publishes a re-roofing checklist, and permits run through Building Permits and Inspections at 202 W. 5th Street.

Where does Plainview get its water?

The City of Plainview operates 16 public water supply wells and a treatment plant for water from the Canadian River Municipal Water Authority, which draws on Lake Meredith and Ogallala Aquifer wells in Roberts County. Hardness varies with the blend, so test your tap before sizing a softener, and consider reverse osmosis at the kitchen sink for drinking water.

Is it worth remodeling a 1960s house in Plainview?

Usually, if the foundation is sound or repairable. Houses from that era often have simple, solid layouts that make it practical to open walls, update the kitchen and baths, and bring the panel, wiring, and plumbing up to date in one project. Start with a foundation check and an honest look at the roof and electrical, then compare the total against what the house will be worth.

How far is Plainview from Lubbock?

About 46 road miles from downtown Lubbock, north on I-27, which runs together with US-87, or roughly 50 minutes. We serve Plainview from Lubbock, so on a project this distance the plan should group site visits, deliveries, and city inspections to keep the job moving between trips.

Sources

  1. [1]Handbook of Texas (TSHA): Plainview, TX
  2. [2]Handbook of Texas (TSHA): Hale County
  3. [3]City of Plainview: Building Permits & Inspections
  4. [4]City of Plainview: Water Production
  5. [5]U.S. Census Bureau ACS 2020 to 2024, Year Structure Built: Plainview (Census Reporter)

RefFrom the journal

NextYour project

Start with a number, not a sales pitch.

Tell us what you are planning and get an honest ballpark range in under a minute. When you are ready, we will visit, measure, and put a written, itemized quote in your hands.

Project
Your Plainview home
Location
Lubbock, TX + 50 mi
Estimate
Free, under 60 seconds
Quote
Written and itemized