M-102Healthy & Smart Home
Lighting, climate, security, and leak protection that work together and stay simple
A professionally installed smart home system in Lubbock typically costs $3,000 to $15,000 in 2026, covering the network, lighting, climate, security, and water protection, and fully integrated whole-home systems run $15,000 to $60,000 and up. We design around a reliable wired network first, then add the systems you will actually use. Every device, account, and password is documented and handed over, so the system is yours.
01Why Nextgen Blueprint
Every smart device rides on the network, so we start with wired access points and a central, conditioned spot for the router instead of a mesh kit hidden in a closet.
We favor local control and open standards like Matter where they fit, so your home keeps working without a subscription you did not ask for or an app you cannot leave.
As a general contractor, we pull low-voltage wire during remodels and new builds, when it costs a fraction of fishing it through finished walls later.
Air quality monitors, ERVs, filtration, and leak sensors can report to the same app as your lights and thermostat, with automations that respond to what the sensors read.
022026 Lubbock pricing
| Service | Typical cost | Timeline |
|---|---|---|
| Smart Home Starter SetupSmart thermostat, video doorbell, smart lock, a handful of smart switches, and app and voice setup. | $2,000 to $5,000 | 1 to 2 days |
| Home Network and Structured WiringRouter and ceiling-mounted access points ($500 to $1,500 on their own), plus wired drops to key rooms, surge protection, and battery backup. | $1,500 to $5,000 | 1 to 3 days |
| Lighting Control and ScenesSmart dimmers and keypads with scenes and schedules, plus tunable-white fixtures where you want them. | $2,000 to $10,000 | 1 to 2 weeks |
| Security Cameras, Locks, and AccessWeather-rated cameras, smart locks, door and window sensors, and alerts to your phone. | $1,500 to $7,000 | 2 to 5 days |
| Climate, Leak, and Energy MonitoringSmart thermostats, leak sensors with an automatic water shutoff valve, freeze alerts, and a panel-level energy monitor. | $1,000 to $4,000 | 1 to 3 days |
| Whole-Home AudioIn-ceiling and in-wall speakers in multiple rooms, played room by room or all at once from your phone. | $5,000 to $25,000 | 1 to 3 weeks |
| Fully Integrated Smart HomeLighting, climate, shades, security, audio, and sensors on one control platform with keypads, touchscreens, and automations. | $15,000 to $60,000+ | 3 to 8 weeks |
A ballpark in under a minute, no obligation.
03Site conditions
Note 01
In a slab home, most new wire runs through the attic, and a Lubbock attic in July is too hot for routers, hubs, and power supplies. We keep electronics in conditioned space and schedule summer attic runs for early morning.
Note 02
Hail, high wind, and lightning arrive with spring. Whole-house surge protection and a battery backup on the network protect equipment and keep locks, cameras, and sensors online through short outages.
Note 03
Hard freezes like the one in February 2021 can burst pipes in exterior walls and unheated spaces. Temperature and leak sensors tied to an automatic main shutoff valve can alert you and stop the water before a small leak floods a room.
Note 04
Outdoor cameras and sensors face intense UV, blowing dust, and hail. We choose weather-rated equipment and mount it under eaves, where it is sheltered but still sees what it needs to.
Smart home pricing depends on how many systems you tie together and how much wiring the house needs. A starter setup with a smart thermostat, video doorbell, smart lock, and a few smart switches typically runs $2,000 to $5,000 installed. A whole-home system covering the network, lighting control, climate, security, and water protection usually lands between $3,000 and $15,000. Fully integrated homes on a single control platform, with keypads, touchscreens, shades, and audio, run $15,000 to $60,000 and up.
The cheapest time to add any of it is when the walls are open. Low-voltage wire pulled during a remodel or new build costs a fraction of fishing it through finished drywall, and a single-story Lubbock ranch with attic access is easier to wire than most people expect. Our guide to smart home upgrades that add value covers the systems Lubbock homeowners ask about most.
Most smart home frustration is really network frustration. Cameras drop, locks stop reporting, and voice commands lag because the router sits in a closet at one end of the house behind brick and drywall. We start with a wired backbone: a router in a central, conditioned spot, ceiling-mounted access points wired back with Ethernet, and wired connections for TVs, cameras, and anything else that does not move.
The network gets surge protection and a battery backup, and on larger systems a separate network for smart devices keeps them apart from the computers and phones you use for banking and work. At handoff we document every device, account, and password, so the system is yours rather than something only the installer understands.
The automations worth paying for solve problems a Lubbock house actually has. These are the ones we recommend most often:
There are two broad paths. App-based ecosystems such as Apple Home, Google Home, and Amazon Alexa work well for most homes, cost less, and increasingly support Matter, a shared standard that lets devices from different brands work together. Professional control platforms add dedicated keypads, touchscreens, and deeper automation, and they make sense for larger homes or anyone who wants whole-house scenes to behave the same way every time.
Either way, we look for local control, so lights and locks keep working when the internet does not. If you are planning a larger electrical project, such as a panel upgrade for an EV charger or an induction range, we coordinate the smart home work with our electrical team so the panel, circuits, and controls are designed once.
08Our process
Start with an instant ballpark online, or call. We ask what you are planning, what bothers you about the house, and what budget you have in mind.
We walk the house, measure, and find the cause before recommending a fix, whether that is soil, drainage, plumbing, framing, or finish.
An itemized quote with materials, labor, permits, allowances, and a schedule. No lump sums and nothing buried in the fine print.
One point of contact, a protected and swept job site, and regular updates. Healthy systems get roughed in while the walls are open.
We walk it with you, close out the punch list, and hand over the manuals and manufacturer warranties for everything we installed.
FAQQuestions
RefFrom the journal
Which smart home upgrades are worth it in Lubbock in 2026: installed costs, how each handles West Texas heat, freezes, and dust, and an honest look at resale value.
Circadian lighting at home in 2026: tunable white LEDs, what the research supports, flicker and color specs, cove lighting with Level 5 walls, and Lubbock costs.
What a smart water shutoff valve and leak sensors cost in Lubbock, how flow-based leak detection works, what installation involves, Wi-Fi and power needs, hard water and freeze concerns, and where to put sensors.
RefOften paired with
NextYour project
Tell us what you are planning and get an honest ballpark range in under a minute. When you are ready, we will visit, measure, and put a written, itemized quote in your hands.