Interior and Exterior Painting in Lubbock, TX

Labor is most of a paint bid, often 70 percent or more, because prep and cutting in take far longer than rolling. That is why two quotes on the same house can differ so much: one includes patching every nail pop, caulking every gap, and priming stains, and the other paints over them. Walls-only work typically runs $1 to $3 per square foot of wall area. For a 2,000 square foot home, a full interior with ceilings, trim, and doors runs about $5,500 to $11,000, and walls only about $3,000 to $6,000. Tall ceilings, dark color changes, and heavy repairs push toward the top.

Our house painting cost guide covers the details, and our free instant estimate gives you a ballpark in under a minute. For an accurate written quote, expect us to walk the rooms, note repairs, and confirm the paint line, sheen, and number of coats for each surface.

Volatile organic compounds are the solvents that evaporate as paint dries, and they account for much of the smell after a room is painted. Zero-VOC is a manufacturer label, not an EPA category. Federal rules cap VOC content in house paint at 250 grams per liter for flat finishes and 380 for nonflat, and a paint sold as zero-VOC should show at or near zero on its data sheet. In practice that means much less solvent odor, and zero-VOC-labeled lines come in the same sheens as conventional paint.

Two caveats keep it honest. Standard colorants can add VOCs back, especially in deep colors, so the tint system matters as much as the base paint. And trim enamels, cabinet coatings, and exterior paints are usually low-VOC rather than zero. Emissions certifications such as CDPH or GREENGUARD Gold measure what the dried paint releases indoors, and we tell you which product goes on each surface. Zero-VOC finishes are also one part of our healthy living systems work, alongside water filtration and fresh-air ventilation.

Many Lubbock homes are mostly brick, so exterior painting often means trim, soffits, fascia, garage doors, and any siding or stucco rather than every wall. That work takes the most sun and weather, and prep decides how long it lasts. We wash surfaces, scrape and sand loose paint, replace failed caulk, and spot-prime bare wood, then apply two coats of 100 percent acrylic exterior paint, which handles UV and temperature swings better than cheaper vinyl-acrylic blends.

Scheduling matters here too. Late September through October is usually the best window, with lighter wind and hail season over. We follow each product's temperature limits, paint west and south walls when they are out of direct afternoon sun, and skip windy days that would blow dust into wet paint. After a hail storm, check trim for chips and exposed wood, because small touch-ups done in time keep water out and delay a full repaint.